Deploy Statistical Process Control
Configure streaming asset properties for SPC monitoring.
Guide Concept
Note: This guide is intended only as a starting point and is not a fully developed or supported solution. This accelerator has been developed using ThingWorx 8.5 and should not be used with any previous versions of the software.
This project introduces you to configuring Properties from your connected streaming assets for Statistical Process Control (SPC) monitoring.
Following the steps in this guide, you will learn how multiple connected assets and their Properties can be displayed in a hierarchy tree.
You will then configure these Properties using predetermined set points, and upper and lower control points for the assets.
Finally, you will learn to navigate the monitoring of the Properties.
We introduce some of the basic building blocks of an SPC accelerator, including important Things and Mashups. You will also use ThingWorx Timers to simulate streaming data.

Guide Info
Level | Intermediate |
Est. Time | 30 Minutes |
Published | Mar 18, 2021 |
Author | David Kessler |
You'll learn how to
- Configure multiple properties for SPC monitoring
- Identify abnormalities in streaming property values
Things used in this guide
-
ThingWorx Foundation